Initial boot up

FUDO is delivered with two uninitiated USB flash drives. During initial boot up, FUDO generates encryption keys, which are stored on enclosed USB flash drives. More information on encryption keys can be found in the Security measures chapter.

First boot up procedure

1. Install device in 19” rack cabinet.
2. Connect both power supply units to 230V/110V power outlets.

Note

Connecting both power supplies is necessary to start the system.

3. Connect network cable to one of the RJ-45 ports.
4. Connect both of the USB flash drives delivered with FUDO.

Note

Initial boot up requires conecting both USB flash drives. More information on encryption keys can be found in Security measures chapter.

5. Press the power button on the front panel.

6. After keys have been initiated, disconnect USB flash drives.

Note

USB flash drives containing encryption keys should be stored in a safe place, which can be accessed only by authorized personnel. In daily operation, one encryption key is required to start the system after which it can be disconnected.

Warning

If the USB flash drives with encryption keys are lost, device will not be able to boot up and stored sessions will not be accessible. Manufacturer does not store any encryption keys.

Related topics:

• Requirements
• Quick start - SSH connection configuration
• Quick start - RDP connection configuration
• System overview
• Security measures